
( Brand: Itw Performance Polymers ), ( Manufacturer Part Number: 9897 )
On aluminum hulls, Gluvit seals seams and rivets acts as a barrier coat to minimize galvanic corrosion. On jet skis, rowboats and canoes, Gluvit epoxy provides abrasion resistance to protect hull sides bottoms from damage by grounding on beaches or rocks. Any pigmented epoxy, urethane, latex or alkyd base paint can be used to overcoat Gluvit. Available in 2 lb Quart and 8 Gallon kits.
To return just send merchandise prepaid, in its original unused condition. Deteriorated wood can be renewed with a few strokes to penetrate and strengthen stringers, decking molding. Seals leaky seams and rivets in aluminum hulls, leaks around fiberglass cabins or decks. Acts as a barrier coat to minimize water absorption and galvanic corrosion.
Orders that qualifying for free shipping may be shipped any method and carrier chosen by Wholesale Marine. An 8 lb unit covers 100-130 square feet at the same thickness. Expect a 2 lb unit of Gluvit to cover 25-35 square feet, when applied at 6-8 mils. Its long working time allows penetration into cracks to seal and strengthen.
For maximum ultraviolet protection, Gluvit must be painted after cure. Hard protective coating flexes with hull movements to bridge and seal hairline cracks. Gluvit epoxy fills minor cracks and pinholes. Item Brand: Itw Performance Polymers.
On wood en hulls, Gluvit seals and protects planks sheeting against water absorption damage from marine parasites. Before over-coating, lightly sand this waterproof epoxy sealer to ensure adhesion. Item MPN: 9897. Provides superior protection for fiberglass, wood, aluminum, and steel.