MAASECHS Press Brake Urethane Die Film 726084273153 X. 012 100FT

( Brand: Maasechs ), ( Part Type: Brake Film ), ( Item Thickness: 0.01 Inches ), ( Compatible Material: Urethane ), ( Unit Count: 1.0 Count ), ( Product Dimensions: 0.01w X 0.01th ), ( Water Resistance Level: Water Resistant ), ( Adhesive Location: One Side ), ( Item Weight: 2.59 Pounds ), ( Adhesive Format: Roll ), ( Surface Recommendation: Metal ), ( Size: 4 X. 012 X 100 ), ( UPC: 726084273153 )

Review MAASECHS Press Brake Urethane Die Protection Film Inch X. 012 100ft Free Shipping

The **Maas Urethane Die Film (Part #726084273153, Model 012, 100-Foot Roll)** is a high-performance, precision-engineered consumable designed to extend the life of your press brake tooling while significantly reducing wear, tear, and maintenance costs. Crafted from a durable, flexible urethane compound, this die film acts as a protective barrier between the metal workpiece and the tooling surfaces, minimizing galling, scoring, and premature tool degradation during high-volume bending operations. Ideal for applications involving aluminum, steel, stainless steel, and other high-strength alloys, this film excels in environments where traditional lubricants or coatings fall short such as in tight-tolerance bending, deep draws, or repeated forming cycles where friction and heat can compromise tool integrity. The **012** designation indicates a medium-thickness formulation, striking a balance between flexibility and abrasion resistance, making it suitable for a wide range of press brake applications, from light-gauge sheet metal to moderate-strength structural bends. With a **100-foot roll**, this product offers substantial coverage, reducing downtime for frequent reapplication and ensuring consistent performance across large production runs. Its self-lubricating properties and resistance to contamination from oils, coolants, or debris make it a reliable choice for cleanroom environments and automated manufacturing lines where contamination control is critical. Whether used in aerospace, automotive, or general fabrication shops, this die film enhances tool longevity, improves surface finish quality, and reduces the frequency of costly die replacements, ultimately contributing to smoother operations and higher productivity.

### **Pros and Cons of buying a Maasch 726084273153 Press Brake Urethane Die Film (012, 100ft)**

1. **Precision and Consistency** Urethane die film is designed to provide uniform bending radii and angles, reducing variations in parts. This is particularly useful for high-volume production where repeatability is critical.

2. **Durability and Longevity** Unlike traditional steel dies, urethane film is more resistant to wear and tear, especially when bending softer materials like aluminum, stainless steel, or copper. It can withstand thousands of bends without significant degradation, reducing downtime for die changes.

3. **Versatility** The **012** designation suggests a specific bend radius (likely 0.12 inches or 3mm), making it suitable for a range of applications where precise bending is required. The **100ft length** ensures ample material for multiple projects without frequent reordering.

4. **Reduced Tooling Costs** Compared to custom steel dies, urethane film is more affordable to purchase and replace. It eliminates the need for expensive, specialized tooling for different bend radii, making it cost-effective for small to mid-sized operations.

5. **Easier Handling and Storage** Urethane film is lightweight and flexible, making it easier to store and transport compared to rigid steel dies. It can be cut to size as needed, reducing waste.

6. **Compatibility with Maasch Press Brakes** Since this product is designed for the **Maasch 726084273153 press brake**, it ensures a perfect fit in terms of dimensions and pressure distribution, minimizing misalignment issues.

7. **Reduced Surface Damage** Urethane film can help prevent marring or scratching on the material being bent, especially when working with coated or finished surfaces.

8. **Quick Setup and Changeover** Unlike steel dies, urethane film can be installed and adjusted more rapidly, reducing machine downtime during production changes.

---

1. **Limited Bend Radius Options** Urethane film is typically available in specific radii (e.g., 012). If your application requires multiple bend angles, you may need to purchase additional rolls, increasing costs.

2. **Not Suitable for All Materials** While urethane film works well for softer metals (e.g., aluminum, mild steel), it may not be ideal for **harder or thicker materials** (e.g., high-strength steel, titanium) that require more force or precision. In such cases, steel dies may be necessary.

3. **Wear Over Time** Although durable, urethane film will eventually degrade after prolonged use, especially with abrasive materials. This may require periodic replacement, adding to long-term costs.

4. **Less Precision for Complex Bends** For **multi-axis bends or complex geometries**, urethane film may not provide the same level of accuracy as custom steel dies. Some applications may still require traditional tooling.

5. **Potential for Sticking or Adhesion** If not properly maintained, urethane film can sometimes stick to the workpiece or the press brake s tooling, requiring cleaning or replacement.

6. **Higher Initial Cost per Unit (Compared to Steel)** While cheaper than custom steel dies, urethane film may still be more expensive than basic steel dies for very high-volume, low-margin applications.

7. **Limited Availability of Custom Sizes** Standard urethane film rolls (like the 100ft option) may not always match exact project requirements, potentially leading to waste if only partial lengths are usable.

8. **Temperature Sensitivity** Urethane can degrade if exposed to extreme heat or cold for extended periods, which may be a concern in environments with significant temperature fluctuations.

---

### **Conclusion**

The **Maasch 726084273153 Press Brake Urethane Die Film (012, 100ft)** is a **cost-effective, versatile, and durable** solution for bending softer metals with consistent results. It excels in **small to mid-sized production runs** where precision and quick setup are priorities, and it reduces the need for expensive custom tooling. However, it is **not ideal for hard materials, ultra-complex bends, or high-volume applications requiring extreme durability**.

For **general-purpose bending of aluminum, mild steel, or copper**, this film is a **strong recommendation**. If your work involves **thick, hard metals or intricate geometries**, you may still need to supplement it with steel dies or other tooling.

### **Recommendation**

- You frequently bend **aluminum, mild steel, or copper** with a **consistent 0.12" (3mm) radius**.

- You want **faster setup times** and **reduced tooling costs** compared to steel dies.

- Your production volume is **moderate**, and you need **repeatable results** without frequent die changes.

- You work with **hard metals (e.g., stainless steel, high-strength alloys)** that require more force.

- Your projects demand **multiple bend radii**, necessitating additional film purchases.

- You need **ultra-high precision** for complex parts, where steel dies may be preferable.

**Final Verdict:** This urethane die film is a **smart investment for most metal fabricators** looking for a balance between cost, speed, and quality in bending operations. Pair it with proper maintenance (cleaning, storage) to maximize its lifespan.

Details:

Urethane Die Film: protect stainless steel parts, pre-coat place the protective film at bending point, and omit secondary polishing operation to save time. Widely Application: it is very suitable as a supplement between tools, and also for friends who love handicrafts. 012 X 100' FREE SHIPPING:: Item Thickness 0.01 Inches, Number of Items 1, Compatible Material Urethane, Unit Count 1.0 Count, Product Dimensions W x Th, urethane, Water Resistance Level Resistant, Adhesive Location one side, Weight 2.59 pounds, Format ROLL, water resistant, Surface Recommendation Metal, Size 4. Easy to Use: cut the desired length according required for use, can be reused.

Press Brake Urethane Die Protection Film 4 X. 012 X 100', Adhesive Side Count 1, Brand Maasechs, Foil Thickness 0.01 Inches, Manufacturer Maasechs.

specifications sealantadhesivee:

• brand: Maasechs
• part type: Brake Film
• item thickness: 0.01 Inches
• compatible material: Urethane
• unit count: 1.0 Count
• product dimensions: 0.01w X 0.01th
• water resistance level: Water Resistant
• adhesive location: One Side
• item weight: 2.59 Pounds
• adhesive format: Roll
• surface recommendation: Metal
• size: 4 X. 012 X 100
• upc: 726084273153

general sealantadhesivee:

• condition: New
• Adhesives, Sealants Tapes > Caulks, Sealants Removers > Caulks Sealants

payments sealantadhesivee:

• wallet: Paypal
• credit card: Visa
• other

returns sealantadhesivee:

• time: 30 Days
• paid by: Seller
• method: Money back
• policy: Returns Accepted

offer sealantadhesivee:

• options: Ship-to-home
• quantity: 1
• availability: In Stock
• sold: 0
• started: February 10, 2026

shipping sealantadhesivee:

• cost: $0.00
• service: Standard
• class: Standard
• type: Fixed
• transit: 4-11 Days

seller sealantadhesivee:

• city: Denver, Colorado
• rating: 96.7%
• # reviews: 836