TIMKEN 455499 Oil Seal 3.437 4.249 0.625

( Brand: Timken ), ( Manufacturer Part Number: 455499 ), ( Part Type: Oil Seal )

Review TIMKEN Oil Seal 3.437 4.249 0.625

The **Timken 455499 oil seal** is a high-performance, precision-engineered sealing solution designed to provide reliable protection against contamination and fluid leakage in demanding industrial applications. This seal features a robust **belted lip design**, crafted from high-quality **nitrile rubber (NBR)**, which delivers exceptional resistance to oils, fuels, and hydraulic fluids while maintaining flexibility across a broad temperature range typically from **-40 F to 250 F (-40 C to 121 C)**. The seal s **3.437-inch (87.3 mm) inner diameter** and **4.249-inch (107.9 mm) outer diameter**, paired with a **0.625-inch (15.9 mm) cross-section**, ensure a precise fit for shafts ranging between these dimensions, making it ideal for heavy-duty machinery such as pumps, compressors, gearboxes, and automotive transmissions where consistent sealing integrity is critical.

Constructed with **reinforced steel backing**, the Timken 455499 oil seal offers superior structural support, reducing deformation under high-pressure conditions and extending the seal s operational lifespan. The **metal-to-metal contact** between the shaft and the seal s lip creates a low-friction interface, minimizing wear while maintaining a tight seal even under dynamic loading. Additionally, the seal s **smooth, polished lip surface** enhances durability by reducing abrasion against the shaft, making it particularly well-suited for applications involving frequent start-stop cycles or variable loads. For enhanced protection in corrosive or abrasive environments, Timken also offers optional **specialty elastomers**, such as **EPDM or Viton**, which can be specified for exposure to water, chemicals, or extreme temperatures beyond the standard NBR range.

Timken s reputation for engineering excellence is evident in the **precise tolerances and consistent quality** of the 455499 seal, which undergoes rigorous testing to ensure leak-free performance under pressure. The seal s **self-aligning capability** accommodates minor shaft misalignments, reducing stress on the lip and preventing premature failure. Whether installed in **industrial gear drives, marine propulsion systems, or heavy-duty off-road vehicles**, this seal provides a dependable barrier against dirt, moisture, and debris, helping to preserve lubrication and extend the service life of critical machinery. With its **universal compatibility** and **long-term reliability**, the Timken 455499 oil seal is a trusted choice for engineers and maintenance professionals seeking a balance of performance, durability, and ease of installation.

### **Pros and Cons of buying a Timken 455499 Oil Seal (3.437" OD, 4.249" ID, 0.625" Width)**

1. **High Quality and Durability** Timken is a well-known brand in the industrial and automotive sectors, known for producing reliable, high-performance seals. Their oil seals are designed to withstand harsh conditions, including high temperatures, pressure, and contamination, making them suitable for heavy-duty applications.

2. **Precision Engineering** The seal s dimensions (3.437" outer diameter, 4.249" inner diameter, 0.625" width) are carefully engineered to fit specific applications, reducing the risk of leaks and ensuring proper sealing performance. This precision minimizes the need for modifications or additional machining.

3. **Compatibility with Various Applications** Timken oil seals are commonly used in automotive transmissions, differentials, gearboxes, and industrial machinery. If your application requires a robust seal for fluid containment, this part is likely a strong candidate.

4. **Long Service Life** Due to the use of high-quality materials (such as nitrile rubber, polyurethane, or other elastomers), Timken seals often have an extended lifespan compared to generic or lower-quality alternatives. This reduces maintenance frequency and downtime.

5. **Warranty and Support** Timken offers warranties on many of its products, and their customer service typically provides technical support, replacement options, or troubleshooting assistance if issues arise.

6. **Resistance to Common Contaminants** The seal s construction often includes features like lip designs, reinforced backups, and corrosion-resistant coatings, which help protect against dirt, moisture, and chemical exposure.

7. **Easy Installation** The standard dimensions make it straightforward to install, especially if the housing or shaft is already prepared. Timken provides installation guidelines to ensure proper fitting and performance.

---

1. **Higher Cost** Compared to generic or aftermarket oil seals, Timken parts are typically more expensive. For budget-conscious buyers, this may be a significant drawback, especially if the seal is only needed for a minor application.

2. **Potential Overkill for Light-Duty Use** If the seal is being used in a low-stress application (e.g., a lightly loaded gearbox or a non-high-performance vehicle), the premium features of a Timken seal may not be necessary, making a cheaper alternative sufficient.

3. **Compatibility Issues with Non-Standard Applications** While the dimensions are standard, some custom or older equipment may require slight modifications (e.g., shaft polishing or housing adjustments) to ensure a perfect fit. If the application is non-standard, additional work may be needed.

4. **Material Sensitivity to Temperature** Some Timken seals use elastomers that degrade over time if exposed to extreme temperatures (either too hot or too cold). If the operating environment is outside the seal s recommended temperature range, premature failure could occur.

5. **Limited Availability in Some Regions** Depending on location, Timken parts may not be as widely stocked as generic brands, requiring special ordering or longer lead times.

6. **Potential for Misapplication** If the seal is not selected for the correct fluid type (e.g., hydraulic oil vs. gear oil) or operating conditions (e.g., high-speed vs. low-speed), it may fail prematurely. Always verify compatibility with the specific application.

7. **Installation Risks** If not installed correctly (e.g., improper seating, damaged lip, or contaminated shaft), even a high-quality seal can fail. Improper installation can void warranties or reduce performance.

---

The **Timken 455499 oil seal** is an excellent choice for applications requiring **high reliability, durability, and performance** in demanding environments. Its precision engineering, long service life, and resistance to contaminants make it ideal for **heavy-duty automotive transmissions, industrial machinery, or high-stress gearboxes**. However, for **low-stress or budget-sensitive applications**, a lower-cost generic seal may suffice without sacrificing performance.

If you are working on a **critical system where leaks or failures could cause significant damage or downtime**, investing in the Timken seal is justified. Conversely, if the application is **minor or non-critical**, weighing the cost against potential savings may lead to a different decision.

---

- You are working on a **high-performance vehicle, heavy-duty equipment, or industrial machinery** where reliability is paramount.

- The application involves **high temperatures, pressure, or contamination risks**.

- You want **long-term performance and minimal maintenance**.

- You are willing to pay a premium for **brand assurance and warranty support**.

- The application is **low-stress or non-critical**, and a generic seal would work just as well.

- Budget constraints make the Timken seal **unaffordable** without justifying the cost.

- You are unsure about **fluid compatibility or installation requirements**, and a lower-cost option with similar dimensions is available.

**Final Verdict:** For most **serious mechanical applications**, the Timken 455499 oil seal is a **strong, well-supported choice** that delivers superior performance over its lifespan. However, always verify the **specific requirements of your application** before purchasing to ensure it is the best fit.

Details:

part #: 455499 prices

• $24.70-$25.00

specifications sealantadhesivee:

• brand: Timken
• mpn: 455499
• part type: Oil Seal

seller sealantadhesivee:

• # reviews: 236
• city: Sweet Grass, Montana
• rating: 97.8%

payments sealantadhesivee:

• credit card: Mastercard
• other
• wallet: Paypal

returns sealantadhesivee:

• policy: No Returns

offer sealantadhesivee:

• options: Ship-to-home
• availability: In Stock
• quantity: 5
• started: April 14, 2026
• sold: 0

shipping sealantadhesivee:

• cost: $5.00
• class: Standard
• service: USPS Ground Advantage
• type: Fixed
• carrier: USPS
• transit: 4-9 Days

general sealantadhesivee:

• condition: New
• Adhesives, Sealants Tapes > Caulks, Sealants Removers > Caulks Sealants

Timken 455499 Is Similar To:

• National Seal 410686n Timken Used Tested Cleaned (26.1% similar) All products are guaranteed to be working but may show signs of use. Packaging and handling, items are safely eds packaged in custom shipping cartons for protection. Sells new and surplus product develops channels to purchase such. The product is used surplus. Call to use a shipping service other ...(August 3rd, 2024)
• Inpro seal M0048 Inpro seal Bearing Isolator Alt Pn Timken 29602-4159 See Desc B6 (25.2% similar) Intro/seal bearing isolate M0048 / alt pn Timken 29602-4159 - 3.875 x 4.875, is discolored from storage, but the seals are pristine, its smooth to touch, just some discoloration, no corrosion...(November 14th, 2024)
• Timken 25003-3460 Garlock Klozure 23x3460 6 750 Inch Id 8.000 Od 625 Thk Oil Seal (29% similar) It is designed by Timken with model number 25003-3460. The garlicky Closure 23X3460 oil seal has a 6.750 inch inner diameter, 8.000 outer and 0.625 thickness...(December 18th, 2024)
• National Seal 416070 Timken New In Box (26.8% similar) Call to use a shipping service other than the ones listed. All products are guaranteed to be working but may show signs of use. Sells new and surplus product develops channels to purchase such. Packaging and handling: items are safely eds packaged in custom shipping cartons for protection. Timken ...(December 31st, 2024)
• Timken 370048a T-a370048 Seal (38.9% similar) Please understand that some factors like weather, high postal traffic, and the performance of shipping companies are outside our control. Comes as pictured...(January 29th, 2025)
• Timken 450096 Seal Pn-450096 89 (48.6% similar) I keep the things need and pass along don't. Other than a light dusting, I have not attempted to clean this item in any other way. I m always happy to answer any questions or provide more photos on request. It is as found. Dirt, grime, oxidation and shelf wear may be present on some surfaces. The ...(February 8th, 2025)
• Timken 450593 1pc Seal 3d5 (55.6% similar) Timken 450593 / new box oil seal, small bore, inch 1X1.828X.296IN. Part number 450593...(February 11th, 2025)
• Timken K85508 Seal Wear Ring 6 Inch Dia 1-1 2 Width (40.9% similar) New, out of original box...(February 18th, 2025)
• Timken 29616-7100 New Large Bore Seal 296167100 Garlock Klozure (33.6% similar) I usually ship USPS, but can ups if cheaper. Location: lb back left steel rack, new - Timken 29616-7100 large bore seal 296167100. Also, two are garlicky Closure. If you prefer one over the other, please specify. Please look at all pictures. New - Timken 29616-7100 large bore seal 2961671 two have ...(March 23rd, 2025)
• Timken 053893490809 National Oil Seal 470390 (55.8% similar) Elite bearings. Timken national oil seal 470390: 470390 nitrite solid dual lip with spring shaft diameter 0.750 outer 1.878 overall width 0.250...(March 27th, 2025)
• Timken 21238-4186 Garlock 212384186 Brand New Large Bore Seal Stock 1452b (32.5% similar) Timken garlicky 21238-4186 / 212384186 brand new large bore seal stock 1452B...(May 1st, 2025)